Cru AES Key Programmer and Keys Bedienungsanleitung PDF herunterladen

Rugged, Reliable, Mobile, Secure

1-800-260-9800 www.CRU-DataPort.com

DataPort AES Key Programmer Users Guide

Package Contents

1 – DataPort AES Programmer

1 – Protective Rubber Boot

1 – 2-Pack of Pre-charged NiMH Rechargeable AA Batteries

1 – 5V AC Power Adapter

1 – Users Guide

Production Operation

The DataPort AES Programmer ships with 2 pre-charged NiMH

rechargeable AA batteries. To install the batteries remove the

rubber boot and slide off the battery cover. Verify polarity, and

then insert the AA batteries. Slide the battery cover on and

replace the rubber boot.

Power on the AES Key Programmer, with the power switch

located on the top of the unit. All LEDs will ﬂash on and the

Power LED (see ﬁgure 1) will ﬂash green while the AES Key

Programmer performs a self check. When complete, the green

LED will stay on.

Note: Blank keys are one (1) time programmable and are write

protected after the programming cycle.

Create Master Key and Copying Keys

1. Plug a blank key into the Master port and up to 4

additional keys in Key 1 port through Key 4 port. The green

Program LED will ﬂash when the AES Key Programmer

recognizes the keys.

2. Press the Create Master button to create a single Master

key or up to 4 additional keys. The green LED will ﬂash

while the AES Key Programmer installs the encryption code

on the keys.

CRU-DataPort’s new Advanced Encryption Standard (AES) Key

Programmer is a cost effective way to create and manage Security

Keys without relying on outside vendors. The standalone key

programmer (no computer required) generates random multi-bit

codes that meet FIPS 140-2 requirements. The random number

generation used in the programmer meets the random number

tests per NIST Special Publication 800-22 and DIEHARD.

AES Key Programmer

3. When the green LED stops ﬂashing the keys are

programmed and ready for use.

If the red LED ﬂashes, the key is already coded or a bad key

and the programming will abort.

WARNING: Do not remove keys during programming.

Removing a key during programming will damage the

encryption code and render the key unusable.

Copying Keys

1. Place the key to be copied in the Master Port. Place new

blank keys in the additional key ports. The green Program

LED will ﬂash as the keys are recognized.

2. Press the Copy button and the green Power On LED will

ﬂash as the Master key is read and the blank keys are

programmed. The programmer will copy the encryption

code to Key 1 port and then sequentially to Key 4 port.

3. When the green Program LEDs stop ﬂashing the keys are

programmed and ready for removal and use.

If the red LED ﬂashes the keys are already coded or a bad

key and the programming will abort. If the Master key is

blank then after the test the copying will abort.

Installing/Removing batteries

With the rubber boot removed, hold the programmer so

the battery bay door is under both thumbs, arrow pointed

outward. With slight downward pressure, slide the door

away from you to expose the battery cavity.

1 2

Inhaltsverzeichnis

Seite 1

Rugged, Reliable, Mobile, SecureTM1-800-260-9800 www.CRU-DataPort.comDataPort AES Key Programmer Users GuidePackage Contents1 – DataPort AES Programme

Seite 2

Rugged, Reliable, Mobile, SecureTM1-800-260-9800 www.CRU-DataPort.comLED FunctionalityThe power LED is a bi-color LED, which ﬂashes green when the uni

Kommentare zu diesen Handbüchern

Keine Kommentare

Cru AES Key Programmer and Keys Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computerzubehör Cru AES Key Programmer and Keys herunter. CRU AES Key Programmer and Keys User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Cru AES Key Programmer and Keys